JSON-LD markup generated by Google Structured Data Markup Helper.

Go to…

Ford

Home / Ford

We Service and Repair all Ford cars

  • 2017 Ford Escape

    Ford Escape
    Mileage
    132,687
    Service Date
    8/6/2025
    Services Performed
    • Activate instrument cluster w/ scan tool, speedometer and tachometer works, Inspect right front wheel speed sensor output, No signal from abs control module, Inspect wiring harness, found yellow wire going to r/f speed sensor damage. Advise customer to fix wire first and recheck for any other issues. NOTE: MISSING WIRE HARNESS BRACKET!!!! After repairing and securing wires harness with tie wraps, found necessary to reset all modules, speedometer and odometer is working as it should. No warning light. no further repair at this time.
    • CUSTOMER STATE TRIP ODOMETER AND SPEEDOMETER IS NOT WORKING,
     
    OLIVIA B. gave our service a 5 star review on 8/6/2025

  • 2013 Ford Explorer

    Ford Explorer
    Mileage
    131,595
    Service Date
    4/9/2025
    Services Performed
    • UPON INSPECTION FOUND ALTERNATOR SOAKED WITH ENGINE OIL. RECOMMEND TO REPLACE VALVE COVER GASKET & TIMING COVER GASKET. REAR BRAKES RUSTED OUT AND ALMOST METAL TO METAL.
    • ALTERNATOR ASSEMBLY – Remove & Replace – Sport – [Includes: Test.]
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
    • Replace rear brake pad linings and rear brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Road test vehicle.
     
    MELODY M. gave our service a 5 star review on 4/9/2025

  • 2009 Ford Fusion

    Ford Fusion
    Mileage
    110,760
    Service Date
    2/9/2024
    Services Performed
    • Inspect brakes
    • MASTER CYLINDER – Remove & Replace – Automatic Trans,4-Wheel ABS – [Includes: Bleed Brake System. NOTE: Deduct .4 when used in conjunction with any other Brake operation(s).]
    • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
     
    JAY C. gave our service a 5 star review on 2/15/2024